BES-Kühler
Vitrinenkühler
BES-Kühler
Wir brauchen und benutzen Vitrinen Kühler in jedem Aspekt unseres Lebens.
COIL: Geometry: 32mm x 28mm
COIL: Copper Tubes Ø3/8”
COIL: “V” type aluminium fins.
COIL: The finned coils are designed with aluminium fins spaced at 6mm crimped onto copper tubes.
COIL: Maximum operating pressure 21 bar.
COIL: Staggered copper tubes.
COIL: The coil circuits are designed for refrigerants R404A, R507F, R449A, R507C, R134A, R407C.
COIL: Different fin spacing can be selected as an option for 4mm to 12mm.
COIL: Refrigerant distributor.
CASING: Electrostatic powder coated RAL 9016 galvanized steel.
CASING: Stainless steel or aluminum casing as optional.
CASING: Hinged/Folding drain tray is standard for all models.
FANS: Selection of a unit cooler with various fan number/diameter combinations offering the dimensional and air throw characteristics best adapted to the size of the cold room or market cooler.
FANS: Selections should be confirmed by your Buzçelik Technical Specialist.
FANS: Motor protection IP54 insulation class F.
FANS: Working conditions -10°C/+50°C.
DEFROST: B1 type defrost system suitable for -10°C/+5°C cold room applications.
DEFROST: Defrost heaters are applied on heat exchanger coil.
DEFROST: This facility enables homogenous heat distribution for fast and efficient defrosting.
DEFROST: Optional Defrost Options
DEFROST: B1 : Light electric defrost (Coil) B2 : - HGD : - WD : -
CAPACITY: The nominal capacities calculated according to Eurovent EN328 standards that refer to SC1-SC2 conditions and are valid for R404A.
OPTIONS: Different casing color.
OPTIONS: Other tube wall thicknesses and fin spacing on request.
OPTIONS: Please keep in touch with our sales department about your special needs that are not mentioned in the catalogue.
ACCESSORIES: Casing made of stainless steel or aluminum.
ACCESSORIES: Epoxy resin coated aluminium fins.
