MKL - KL SERIES
Condenser
MKL - KL SERIES
Commercial Type Condensers
Cooling systems are an essential part of our lives.
Coil
• Ø5/16” & Ø3/8” copper tube. • ‘’V” type aluminum fıns. • Header inlet and outlet tube connections made of copper. • maximum operating pressure 21 bar for standard products. • Staggered copper tubes. • The coil circuits are designed for refrigerants R404A, R407F, R507C, R22, R134A • Different fın spacing can be selected as an option for 1,8mm to 4mm.
Casing
• Electrostatic powder coated RAL 7035 galvanized steel. • Galvanized Steel, Stainless Steel and Aluminum sheet • Each fan chamber is separated by internal baffle plates to prevent induced wind milling of off-cycle fans
Fan
• 0200-0250-0300-0350-0400-0450-0500 mm / 230V-50Hz-Monofase / 900, 1200, 1400 d/d fans. • Selections should be confırmed by your Buzçelik Technical Specialist. • Standard or low noise level are available. • Different kinds of motors available as optional. (EC or AC) • Motor protection IP54 insulation class F • Different kinds of accessories available as optional. (FlowGrid ete.) • Working conditions -40°C/+50°C.
Capacity
The nominal capacities calculated according to Eurovent EN328 standards that refer to ΔT=15°C condition and are valid for R404A.
Options
• Different casing color. • Other tube wall thicknesses and fın spacing on request. • Mono phase 220V 1 ~ 50Hz fan or three phase 400V 3~ 50Hz fan. • Please keep in touch with our sales department about your special needs that are not mentioned in the catalogue.
Note
Please read “lnstallation, Operation and Maintenance lnstructions” for mounting and maintenance.
Accessories
• Casing made of aluminum or stainless steel. • Epoxy resin coated aluminum fıns.
